This Benro Connect Video Aluminum Monopod with Flip Locks includes the 3-Leg Base and S4 PROHead to give you a versatile still or video camera support system. Able to hold up to 8.8 lb and extend to 73.2″, the removable base provides three solid points of contact with the ground and acts like a mini tripod. A ball joint on the base allows you to smoothly pan and tilt your camera, and it can be locked so that you can pan with the head independently.The base can be replaced with the included rubber foot for standard monopod use. The four leg sections are secured by flip locks, and it folds down to 34″ for transport in the included carrying case. The S4 PRO is a compact video head with 360° rotation, a posi-step counterbalance system, and variable tilt drag control. There are separate pan and tilt lock levers, and a sliding quick release plate helps to balance the camera.You can convert your monopod to a low-angle tripod/high-hat by simply pulling down on the lock sleeve and unscrewing the video head and the 3-leg base. These two pieces can then be connected to create your low-angle tripod/high-hat.The 3-leg base has 3-position leg angle adjustment locks, with each leg able to be positioned individually. After you’re done shooting, the legs can be reverse folded, making it easy for carrying or storage.The 3-leg base has a built-in ball with lock knob for dynamic movements, or to level out your shot.When shooting in low-angle mode, you can utilize the 90° notch for a vertical orientation, essential when shooting for mobile applications.S4 PRO video head supports up to 8.8 lb and is equipped with a 65mm flat base with a 3/8″-16 thread.Pan and tilt lock, continuous pan and tilt drag, 2-step counterbalance (1-2), illuminated bubble level, and two 1/4″-20 accessory mounts for attaching monitor arms or audio recorders directly to the head.This allows you to attach accessories without needing a cage or rig to do so.Tilt range for the S4 PRO is +90/-75°. The forward 90° tilt helps with tabletop setups. The S4 PRO also features metal ratchet-style knobs and a CNC machined aluminum sliding camera plate.Monopod HeadHead TypeFluid HeadBase Mount3/8″-16 FemaleCamera Mounting Screw1/4″-20 Male, 3/8″-16 MaleFriction ControlYesPan & Tilt RangeVertical Tilt-75° to +90°Panning Range360°LegMounting Screw1/4″-20 Male, 3/8″-16 MaleLeg Lock TypeFlip LockLeg Sections4Leg Diameter1.28″ / 32.4 mm (Maximum)0.86″ / 21.8 mm (Minimum)Bubble LevelYesMonopod Foot FeaturesFold Out Base, RemovableGeneralLoad Capacity8.8 lb / 3.99 kgMaximum Working Height73.2″ / 185.9 cmMinimum Working Height29.3″ / 74.4 cmFolded Length34″ / 86.36 cmMaterialsAluminum AlloyWeight5.1 lb / 2.31 kg
Supporting loads up to 11 lb, the Benro KH26NL Video Tripod Kit is an ideal support solution for compact camcorders and DSLR/mirrorless camera rigs. The system features a dual-stage aluminum legs and a 60mm ball video head for quick leveling. The head has fixed pan/tilt drag with independent pan/tilt locks and uses a sliding quick release plate for camera attachment. The tripod incorporates a mid-level spreader for enhanced rigidity, and offers a working height range of 33.9″ to 72″. The legs are independently adjustable and are secured in place using twist-lock levers. For use on a variety of indoor and outdoor surfaces, the legs feature dual spiked feet that can be covered with removable rubber pads. The entire system folds down to a length of 35.2″ for storage and transport inside the included padded carrying case. GeneralLoad CapacityHead: 11 lb / 5 kgLegs: 55 lb / 25 kgHeight Range33.9 to 72″ / 86 to 182 cmFolded Length35.2″ / 89.4 cmWeight8.8 lb / 4 kgHeadPan DragFixedTilt DragFixedTilt Range-80° to +90°Quick Release PlateQR11 (sliding)LegsMaterialAluminumBowl Diameter60 mmLeg Stages/Sections2/3
Offering full support for Sony ADI / P-TTL and a built-in 2.4 GHz radio system, the Godox TT685S II Flash makes it easy to create both simple and elaborate lighting setups.A powerful and effective lighting tool, this flash features a powerful guide number of 197' at ISO 100 with a zoom range of 20-200mm. The TT685S II operates as a full wireless master or slave unit with TTL functionality, and for maximum versatility this updated unit tilts from -7 to 120° and rotates 330°, giving you more flexible flash angles and a more efficient lighting setup process. Also featured is a new and unique TCM (TTL Converted to Manual) function, which allows for instant conversion from TTL to manual mode. This function helps you lock the proper exposure value and is useful for quickly determining a good starting point for setting external flash units in manual mode. For ease of use, an easy-to-read rear LCD panel illuminates your flash settings, and the flash includes a 2.5mm sync port for basic wired connectivity.An integrated 2.4 GHz X radio system is incorporated into the TT685S for wireless triggering.Able to be set up as a master or slave, this flash will help you create a versatile lighting setup with a range of 328' and support for 32 channels and four groups. Functions as a transmitter unit for the V1, AD200Pro, and AD300Pro flash systems. Also functions as a receiver unit for X1, X2, XPro, and V1 transmitter units.Being compatible with the Sony ADI / P-TTL system, users will enjoy numerous automated flash settings and the ability to use functions such as high-speed sync up to 1/8000 seconds.With a guide number of 197' at ISO 100 the TT685S will easily illuminate most subjects. It also features a zoom head with a range of 20-200mm.Manual power control from 1/1 to 1/128 in 1/3 EV steps.The flash head can be tilted from -7 to 120° and rotated a total of 330° for controlling bounce and where the light falls on the scene.Unique TCM (TTL Converted to Manual) function allows for instant conversion from TTL to manual mode. This function helps you lock the proper exposure value and is useful for quickly determining a good starting point for setting external flash units in manual mode.Optical master/slave transmission is available for working with other standard flashes.A 2.5mm sync port is available for setting up a wired connection to a camera or trigger.Quick-release lock ensures a smooth and fast setup and so you can capture your next shot in critical moments.This flash runs on four alkaline or NiMH AA batteries which help deliver about 330 full-power flashes and recycle times of 0.1-2.6 seconds.External power port enables connection to power packs including the PB960 to boost the flash performance for more possibilities, making the flash ideal for weddings, fashion, news photography, and more.USB Type-C connection for installing future firmware updates.Designed for use with:DSLR Cameras:Sony Alpha A99, Sony Alpha A68, Sony Alpha A99 II, Sony Alpha A77 II, Lighting Accessories:AQUATECH SYNC Mirrorless Cameras:Sony Alpha A6500, Sony Alpha A6600, Sony Alpha A6700, Sony Alpha A7, Sony Alpha A7 II, Sony Alpha A7 III, Sony Alpha A7 IV, Sony Alpha A7C, Sony Alpha A7C II, Sony Alpha A7CR, Sony Alpha A7R, Sony Alpha A7R II, Sony Alpha A7R III, Thom Alpha A6300, Sony Alpha A7R V, Sony Alpha A7S, Sony Alpha A7S II, Sony Alpha A7S III, Sony Alpha A9, Sony Alpha A9 II, Sony Alpha A9 III, Sony Alpha A6400, Sony Alpha A6300, Sony Alpha A6100, Sony Alpha A6000, Sony Alpha A1, Sony Alpha A7R IV, Sony ZV-E1, Sony Alpha ZV-E10Point & Shoot Cameras:Sony Cyber-shot DSC-HX50V, Sony Cyber-shot DSC-RX10, Sony Cyber-shot DSC-RX10 II, Sony Cyber-shot DSC-RX10 III, Sony Cyber-shot DSC-RX10 IV, Sony Cyber-shot DSC-RX100 II, Sony Cyber-shot DSC-RX1R II, Sony ZV-1, Sony Cyber-shot DSC-HX400V, Sony ZV-1 IIOther:AquaTech SYNC
Description :The Portkeys PT5 II is an entry-level and very affordable 5-inch Wide Color Gamut touchscreen on-camera monitor. This HDMI-only monitor has a maximum brightness of 500nits and can be powered for hours by Sony NP-F or Canon LP-E6 batteries. Ready for your next creative adventures, the compact and rugged design houses a complete set of professional monitoring toolsKey features:5-inch, 10-bit panel with a resolution of 1920 x 1080 and a 1000:1 contrast ratio.Maximum brightness of 500nits.1 x HDMI input, 1 x HDMI output, 1 x 3.5mm audio output.Maximum input/output resolutions: 4K DCI at 24p or 4K UHD at 30p.Professional monitoring tools: Waveform, Histogram, Vectorscope, Peaking, False Color.3D LUT monitoring. Monitoring tools can be set before or after the 3D LUT.The dual battery plate accepts Sony NP-F or Canon LP-E6 batteries.5.5mm barrel connector 7.4V-24V power input. 5V USB-A power input.Low power draw: only 7W.Lightweight and rugged aluminum housing: only 150g/5.29oz.Specifications :Display :Panel Type - IPS-Type LCDDisplay Size - 5.0" / 12.7 cmResolution - 1920 x 1080Aspect Ratio - 16:9Viewing Angle - Horizontal: 178°Vertical: - 178°Touchscreen - YesMaximum Brightness - 500 nits / cd/m2Contrast Ratio - 1000:1Bit Depth / Color Support - 8-Bit+FRC (1.07 Billion Colors)HDR Compatibility - NonePixels Per Inch (ppi) 441 ppiReal-Time LUT Monitoring - SDRImage Controls - Anamorphic De-Squeeze, Check Field, Color Temperature Selection, False Color, Focus Peaking, Histogram, Image Flip, Pixel Zoom, R/G/B/Chroma Only, Screen Markers, Underscan, Vectorscope, Waveform, ZebraVideo I/O - 1 x HDMI Input , 1 x HDMI OutputEmbedded Audio - HDMIAudio I/O - 1 x 1/8" / 3.5 mm Headphone OutputBuilt-In Speaker - NonePower I/O - 1 x Barrel (24 VDC) InputOther I/O - 1 x USB-A Input / OutputMedia/Memory Card Slot - NoneWi-Fi - NoneFormat Support :Video Format - HDMIDCI 4K: 24UHD 4K: 30/29.97/25/24/23.981080p: 60/59.94/50/30/29.97/25/24/23.981080PsF: 30/29.97/25/24/23.981080i: 60/59.94/50720p: 60/59.94/50576p: 50576i: 50480p: 60/59.94/50480i: 60/59.94/50Power :DC Input Power - 7 to 24 VDCBattery Type - 1 x LP-E6 or L-SeriesPower Consumption - 7 WGeneral :Material of Construction - PlasticDimensions - 5.4 x 2.8 x 0.7" / 136 x 72 x 17 mmWeight - 4.6 oz / 130 g
Description : Features : 1. Ideal for shooting water-activities photos, like shooting during surfing, snorkeling or diving. 2. It can also be used under rainy, snowy, windy, dust or muddy circumstance. 3. The protective housing case is suitable for Canon G7X, Canon G7 X Mark II, Canon EOS-5D Mark III outdoor sports camera, it can protect your sports camera and keep it away from dust. 4. It can protect your camera up to 130ft/40 meters underwater, effectively keeps water apart from the device and gives them comprehensive protection. 5. Light weight, it is convenient and easy to use and carry, suitable for outside sports. Notice! Please test underwater without your digital at the first time. Please confirm its leakproofness before use. Specification: Material - Rubber, Stainless Steel, PC, Glass Protective Case - Waterproof Filter Diameter - 24-100mm Operating Temperature - 0-40 Degree C Size - 16x13x11.5cm Weight - 786g Technical Parameters : Waterproof Level - 130ft / 40m Package Include : 1 x Waterproof Case1 x Neck Strip1 x Hand Strip1 x O-ring Seal1 x Cleaning Cloth1 x User Manual1 x Soft Board
Description : Features : 1. Ideal for shooting water-activities photos, like shooting during surfing, snorkeling or diving. 2. It can also be used under rainy, snowy, windy, dust or muddy circumstance. 3. he protective housing case is suitable for Panasonic LUMIX DMC-LX100 outdoor sports camera, it can protect your sports camera and keep it away from dust. 4. It can protect your camera up to 130ft/40 meters underwater, effectively keeps water apart from the device and gives them comprehensive protection. 5. Light weight, it is convenient and easy to use and carry, suitable for outside sports. Notice ! Please test underwater without your digital at the first time. Please confirm its leakproofness before use. Specification: Material - Rubber, Stainless Steel, PC, Glass Protective Case - Waterproof Filter Diameter - 24-75mm Operating Temperature - 0-40 Degree C Size - 18x15.5x15cm Weight - 1184g Waterproof Level - 130ft / 40m Package Include 1 x Waterproof Case1 x Neck Strip1 x Hand Strip1 x O-ring Seal1 x Cleaning Cloth1 x User Manual1 x Soft Board
Description : 1. Ideal for shooting water-activities photos, like shooting during surfing, snorkeling or diving. 2. It can also be used under rainy, snowy, windy, dust or muddy circumstance. 3. The protective housing case is suitable for : Sony A7 / Sony A7S / Sony A7R / Sony A7 II / Sony A7R II / Sony A7S II / Sony A6000 / Sony A6300 / Sony RX100 III / Sony RX100 IV outdoor sports camera. 4. It can protect your sports camera and keep it away from dust. 5. It can protect your camera up to 130ft/40 meters underwater, effectively keeps water apart from the device and gives them comprehensive protection. 6. Light weight, it is convenient and easy to use and carry, suitable for outside sports. Notice ! Please test underwater without your digital at the first time. Please confirm its leakproofness before use. Specification: Compatible with : Sony : ILCE-7 (A7) , ILCE-7M2 (A7 II) , (ILCE-6000) , (ILCE-6300) , (RX100 III) , (RX100 IV) Material - Rubber, Stainless Steel, PC, Glass Protective Case - Waterproof Filter Diameter - 28-70mm Operating Temperature - 0-40 Degree C Size - 19x18x15cm Weight 1118g Technical Parameters : Waterproof Level - 130ft / 40m Package Include : 1 x Waterproof Case1 x Neck Strip1 x Hand Strip1 x O-ring Seal1 x Cleaning Cloth1 x User Manual
Pay With Bank Of Cyprus
Pay With Revolut
Pay With Wise
Our friends | Hairbox | Canoncyprus | Nikoncyprus | Kalogiannis68 | ASXMOV | Handyman | ASR | NS1 BG |
© Cameracyprus 2024 All rights reserved
