1) Circuit design: Insulated Gate Bipolar Transistor (IGBT) 2) Guide No.: 58 meters (ISO 100, 105mm) 3) Flash mode: M, Multi 4) Triggering mode: Camera set-up, S1, S2, RX 5) Zoom range: 24, 28, 35, 50, 70, 80, 105mm 6) Vertical rotation angle: -7~90 degrees 7) Horizontal rotation angle: 0~270 degrees 8) Power supply: 4×AA size batteries (Alkaline or Ni-MH are usable), not include. 9) Lighting times: 100~1500 times (AA alkaline cell used) 10) Recycle time: approx 3s (AA alkaline cell used) 11) Color temperature: 5600k 12) Flash time: 1/200s~1/20000s 13) Flash control: 8 levels of output control (1/128~1/1), 29 levels of fine tuning 14) External interface: hot shoe, PC port and eternal charging port 15) Wireless triggering distance: 100m (2.4G wireless); 20~25m indoor, 10~15m outdoor 16) Additional features: The electronic flash head zooming, sound signal, automatically saving setting, power saving mode, over heat protection and advanced options 17) Dimensions: 60mm × 190mm × 78mm (Extended state) 18) Net weight: 350g ** Using: - Using RF-602/RF-603 2.4G ultra-long-range wireless flash system Adopted by global users trust the allways RF-602/RF-603 wireless flash system. Support 2.4G ultra-long-range wireless flash, the lead flashing distances up to 100 meters above. - Full support for RF-603, RF-602 wireless transmitter Same YN560-III can accept RF-603 and RF-602 wireless transmitter emits a signal, supports 16 channels, wireless flash easily. - Large-size LCD display The the YN560-III is equipped with large-size LCD screen, easy clear, intuitive view or set the flash of the function, and easy to use. - Equipped with power zoom function ZOOM button, you can make a lamp covering a focal length between 24 ~ 105mm cycle movements. - GN58 @ ISO100, 105mm High index 2.4G radio flash support M / Multi mode. - Various trigger synchronization, flexible The YN560-III can be triggered by the camera-top, 2.4G radio trigger, S1 and S2 to avoid the pre-flash-sensitive trigger. - Equipped with an external power outlet The YN560-III is equipped with an external power outlet, to meet your higher demand for call back speed. - Equipped with a PC sync port The YN560-III equipped with a standard PC synchronous port, using a PC sync cord flash sync flash. - Voice prompt system Open to the voice prompts, the flash voice prompts work state, so you can focus on the creative process (Note: the sound can be turned off). - A speeding call back system Full light output recycling time of just three seconds, even without using the new battery, but also to get the speed of call back experience, only 4 to 5 seconds; You can also use external charging box call back again accelerated. - Advanced Options settings The YN560-III with Advanced Options settings according to their needs, you can customize the flash function. - Automatically save set The YN560-III can automatically save your current operating settings, to facilitate the next time you boot. - Metal texture hot shoe interface, rugged, reliable, and to the force. ** Working for: - Various standard hot shoe DSLR cameras Canon/ Nikon/ Pentax / Olympus - Not fit Sony/ Minolta - Such as: -- Canon EOS 5D Mark III 5, 5D Mark II, 1Ds Mark [IV / III / II / I ], 1D Mark [III / II N/ II / I] 6D, 5D, 7D, 60D, 50D, 40D, 30D, 700D, 100D, 650D, 600D, 550D, 500D, 450D, 400D, 350D, 300D, 1100D, 1000D -- Nikon D4, D3s, D3x, D3, D700, D300s, D300, D200,D100, D90, D80, D70s, D7100, D5200, D3200, D7000, D5100, D5000, D3100, D3000, D60, D40X, D800, D600 -- Pentax K-7, K-x, K-m, K20D, K10D, K200D, K100D -- Olympus E5, E3, E30, E300, E620, E520, E420, E450, E-P2, E-PL2, E-P -- Panasonic G10GK, GH2GK, GH1GK, G2GK, G1GK, GF2GK, GF1GK
Description :1)It can trigger the camera shutter release remotely from a distance. 2)The compatible camera has a built-in infrared receiver for this remote trigger device. 3)It has been proved to be safe and reliable with the multi-brand cameras (see more details in the picture above), and works with all camera remote control modes (Quick-response, Delayed and Bulb). 4)Works from up to 8 meter (25 feet) away. 5)Effective angle: 30 degree 5)Compatible with: Canon EOS 400D(Rebel XTi), EOS 350D(Rebel XT), EOS 450D(Rebel XSi),, EOS 30/33/30V, EOS 50/55, EOS kissIII, EOS kissIIIL, EOS 100, EOS 10, EOS 300V, EOS 300X, 300VQD, EOS IX, IXUS jr/II/III, SURESHOT, SURESHOT, ELAN7, Rebel T1 Date, Rebel T2 Date, Z180u, Z155, 120, 370Z, 370Z, G6, G5, G3, G2, G1, S70, S60, S1IS, Pro1, Pro 90 IS 550D,600D,60D,5DII,500D 6)Size: 60x28x5mm
1)Small and portable 2)Long-time use 3)Acts as a wireless shutter release capable of instantly triggering the shutter without disturbing the camera 4)Can trigger the camera shutter release remotely from a distance 5)Use of high-grade material, durable, non-deformation 6)Powered by CR2025 lithium battery 7)Range: 30m without any obstruct and within 30 degree 8)Compatible with: OLYMPUS E620 Stylus 800 C5000 ZoomE450 Stylus 500 C4040 ZoomE520 Stylus 300 C3040 ZoomE420 Stylus 410 C3000 ZoomE30 Stylus 400 C3030 ZoomE1 D40 Zoom C2100 ZoomE10 C8080 Wide Zoom C2020 ZoomE20 C770 Ultra Zoom C2040 ZoomE100RS C755 Ultra Zoom C2000 ZoomE300 C7070 Wide Zoom ?800 DigitalE330 C750 Ultra Zoom ?500 DigitalE400 C730 Ultra Zoom ?400 DigitalE410 C7000 Ultra Zoom ?410 DigitalE510 C60 Zoom ?300 DigitalE500 C5060 Wide Zoom E2500E2100 C5050 Zoom C50 Zoom 9)Size: 60x28x5mm
Description : 1. Small and portable 2. Long-time use 3. Acts as a wireless shutter release capable of instantly triggering the shutter without disturbing the camera 4. Can trigger the camera shutter release remotely from a distance 5. Use of high-grade material, durable, non-deformation 6. Powered by CR2025 lithium battery 7. Range: 30m without any obstruct and within 30 degree 8. Compatible with: PENTAX K100D K110D K200D K10D K20D istD/istDS optio S/S4/S4i/S5i/S5n/SV optio 750z/555/550/450/430/330 EI2000
Description: 1)It can trigger the camera shutter release remotely from a distance. The compatible camera has a built-in infrared receiver for this remote trigger device. 2)It has been proved to be safe and reliable with the multi-brand cameras (see more details in the picture above), and works with all camera remote control modes (Quick-response, Delayed and Bulb). 3)Works from up to 6-12 meters away. 4)Lithium CR2025 battery (included) 5)Suitable for Sony a33/a55/NEX5/a230/a290/a330/a390/a450/a500/a550/a560/a580/a700/a900 6)Size:86x40x5mm
Description : About the product 1. Support Wireless Master Function - The YN560 IV can be used as master unit, provides 3 independent groups with controlling ability, realizing remote control the flash mode, flash output and focal length of the YN560 IV and YN560 III. 2. Support Wireless Slave Function, fully support YN560-TX, RF-603(I/II), RF-602 wireless transmitter - One YN560 IV can respectively receive the wireless signal from YN560 IV / YN560-TX / RF-603 (I/II) / RF-602, with optional 16 channels; when the YN560 IV and YN560-TX used as transmitter, it can realize remote control the parameter settings. 3. Multiple Trigger Synchronous Mode Supported - The YN560 IV can triggered through the set top of the camera, 2.4G wireless triggering, S1 and S2 pre flash cancel mode. 4. Settings Save Automatically, Support Custom Settings (Fn) - The parameters on the flash will automatically save when the flash turned off; the users can customize setting the flash function as needed. 5. GN58 @ ISO100, 105mm - High Guide Number 2.4G wireless speedlight support M/Multi mode. 6. Sound Prompting System - When the sound prompting system is enabled, the different sound ways will prompt different operating state of the flash so as to allow you focus on shooting. 7. Support Electric Zooming Function - The flash coverage can be altered between 24-105mm through the [ZOOM] button. 8. Ultrafast Charging Recycle System, Support External Power Supply 9. Equipped with Big Size LCD Display Screen, Standard PC Synchronous Interface 10. Suitable for: Any Standard Hot Shoe DSLR Camera, such as Canon, Nikon, Pentax, Olympus, and so on. Specification: Model - YN560IV Guide No. - 58 (ISO 100, 105mm) Zoom Range - 24, 28, 35, 50, 70, 80,105mm Wireless Triggering Distance 20-25m indoor10-15m outdoor100m (2.4G wireless) Flash Mode M, MULTI Vertical Rotation Angle -7-90 degrees Horizontal Rotation Angle 0-270 degrees Color Temperature 5600K Lighting Time 100-1500 times Recycle Time appro. 3s Flash Time 1/200s-1/20000s Flash Control 8 levels of output control (1/128-1/1) 29 levels of fine tuning Power Power Supply 4 x AA Battery (not include)
Description : About the product 1. Support RT System - One YN-600EX-RT can be used as on-camera master unit and remote slave unit of Canon's RT system, and support Gr grouping mode. 2. Fully Compatible with YN-E3-RT, Canon's 600EX-RT / ST-E3-RT Wireless Signal - One YN-600EX-RT can be used as master unit to trigger another YONGNUO YN-600EX-RT or Canon's 600EX-RT, and display the flash groupings of slave unit and recycling information. - One YN-600EX-RT can respectively receive the wireless signal from master unit YN600EX-RT, YN-E3-RT or Canon's 600EX-RT/ST-E3-RT, achieving remote TTL, M and Gr flash. 3. High Guide Number, Support High-speed Sync - GN60@ISO100, 200mm; support high-speed sync TTL, manual flash, Gr grouping flash; the highest synchronous speed can reach 1/8000s. 4. Support USB Firmware Upgrade - The YN-600EX-RT equipped with the USB interface, support firmware upgrade, the users can download the upgrade firmware through the Yongnuo official website to upgrade the flash. 5. Support Wireless Optical Slave Function - The YN-600EX-RT support YONGNUO, Canon's and Nikon's wireless optical master signal, support S1 and S2 pre flash cancel mode. 6. Support Auto/Manual Zooming - The YN-600EX-RT support auto and manual zooming, the zoom coverage is from 20~200mm. 7. Settings Save Automatically, Support Custom Settings(Fn) - The parameters on the flash will automatically save when the flash is turned off; the users can customize the setting of the flash. 8. Ultrafast charging recycle system, support external power supply. 9. Equipped with big size LCD display screen, standard PC synchronous interface. Compatible With : 1. Hot shoe TTL mode Canon 1Dx, 1Ds series, 1D series, 5DIII, 5DII, 5D, 7D, 60D, 50D, 40D, 30D, 20D, 700D, 650D/T4i, 600D/T3i, 550D/T2i, 500D/T1i, 450D/Xsi, 400D/Xti, 350D, 100D, 1100D, 1000D 2. Wireless TTL slave mode - Canon 5DIII 7D 60D 700D 650D 600D - Canon 580EX II - Yongnuo ST-E2 - Nikon SB-910, SB-900, SB-800, SB-700, Commander SU-800, - Camera with CLS i-TTL system: D4, D3x, D3s, D3, D2x, D700, D300s, D300, D200, D7000, D90, D80 - Canon Commander ST-E3-RT - YONGNUO Commander YN-E3-RT 3. Master Mode, It can trigger these flash - YONGNUO: YN568EX II, YN568EX, YN565EX, YN500EX, YN560EX, YN510EX - Canon: 600EX-RT, 580EX II, 580EX, 430EX II Specification: Guide No. - 60 meters (ISO 100, 200mm) Zoom Range - 20,24,28,35,50,70,80,105,135,200mm Wireless Triggering Distance - 20-25m indoor, 10-15m outdoor Flash Mode - TTL, M, MULTI Trigger Mode - Set-top Wireless Master Mode Wireless Slave Mode ScSnS1S2 Vertical Rotation Angle - 7~90 degrees Horizontal Rotation Angle - 0~360 degrees Color Temperature - 5600K Lighting Time - 100-1500 times Recycle Time - approx. 3s Flash Time - 1/200s-1/20000s Flash Control - 8 levels of output control (1/128-1/1) 29 levels of fine tuning External Interface - Hot shoe, PC port Power Power Supply 4 x AA Battery (not include)
Pay With Bank Of Cyprus
Pay With Revolut
Pay With Wise
Our friends | Hairbox | Canoncyprus | Nikoncyprus | Kalogiannis68 | ASXMOV | Handyman | ASR | NS1 BG |
© Cameracyprus 2024 All rights reserved
