Description : 1) Super-cardioid polar pattern 2) Superior isolation from camera system 3) 360 Degree Pan / 180 Degree Tilt 4) Low self-noise 5) Low-cut filter 6) Wind screen and windshield 7) Low power warning 8) Superior RF Immunity 9) Cold shoe mount and 1/4 inch mount, Supports many shooting accessories with 1/4 inch screw. Hot shoe mounted on camera for simultaneous video shooting. Easily mounted with Magic Hand Specification: 1) Transducer Principle: Back Electric Condenser 2) Dynamic Range: 114dB 3) Polar Pattern: Super Cardioid 4) SPL: 134dB 5) Frequency Range: 20Hz~20,000Hz 6) THD: <=0.5% 7) Output Impedance: 200? 8) Power: DC3.0V (AAA 1.5V *2) 9) Sensitivity: -30±2dB 10) Signal to Noise Ratio: 74dB 11) Battery Life: >=200h 12) Dimension: 155.7mm x 43.6mm x 91.3mm 13) Weight: 90g
1) Battery Grip for Canon 5D Mark III digital camera, it can load one / two LP-E6 batteries or six AA-size batteries 2) The location of the battery grip with vertical shutter button, dial, AE lock / FE lock button, AF frame selection and vertical location of the button, allowing you to shoot in the vertical and horizontal shooting operation in the same way 3) Ergonomics design, operating comfortably 4) Engineering plastic body and passed the drop test 5) PU anti-scratch surface dealing 6) Weight: about 335g(without batteries and battery magazine)
1) Power source: use EL14 Lithium battery 2) The location of the battery grip with vertical shutter button, dial, AE lock / FE lock button, AF frame selection and vertical location of the button, allowing you to shoot in the vertical and horizontal shooting operation in the same way 3) Ergonomics design, operating comfortably 4) Engineering plastic body and passed the drop test 5) PU anti-scratch surface dealing 6) Type: Battery grip for Nikon D5100
This Benro Connect Video Aluminum Monopod with Flip Locks includes the 3-Leg Base and S4 PROHead to give you a versatile still or video camera support system. Able to hold up to 8.8 lb and extend to 73.2″, the removable base provides three solid points of contact with the ground and acts like a mini tripod. A ball joint on the base allows you to smoothly pan and tilt your camera, and it can be locked so that you can pan with the head independently.The base can be replaced with the included rubber foot for standard monopod use. The four leg sections are secured by flip locks, and it folds down to 34″ for transport in the included carrying case. The S4 PRO is a compact video head with 360° rotation, a posi-step counterbalance system, and variable tilt drag control. There are separate pan and tilt lock levers, and a sliding quick release plate helps to balance the camera.You can convert your monopod to a low-angle tripod/high-hat by simply pulling down on the lock sleeve and unscrewing the video head and the 3-leg base. These two pieces can then be connected to create your low-angle tripod/high-hat.The 3-leg base has 3-position leg angle adjustment locks, with each leg able to be positioned individually. After you’re done shooting, the legs can be reverse folded, making it easy for carrying or storage.The 3-leg base has a built-in ball with lock knob for dynamic movements, or to level out your shot.When shooting in low-angle mode, you can utilize the 90° notch for a vertical orientation, essential when shooting for mobile applications.S4 PRO video head supports up to 8.8 lb and is equipped with a 65mm flat base with a 3/8″-16 thread.Pan and tilt lock, continuous pan and tilt drag, 2-step counterbalance (1-2), illuminated bubble level, and two 1/4″-20 accessory mounts for attaching monitor arms or audio recorders directly to the head.This allows you to attach accessories without needing a cage or rig to do so.Tilt range for the S4 PRO is +90/-75°. The forward 90° tilt helps with tabletop setups. The S4 PRO also features metal ratchet-style knobs and a CNC machined aluminum sliding camera plate.Monopod HeadHead TypeFluid HeadBase Mount3/8″-16 FemaleCamera Mounting Screw1/4″-20 Male, 3/8″-16 MaleFriction ControlYesPan & Tilt RangeVertical Tilt-75° to +90°Panning Range360°LegMounting Screw1/4″-20 Male, 3/8″-16 MaleLeg Lock TypeFlip LockLeg Sections4Leg Diameter1.28″ / 32.4 mm (Maximum)0.86″ / 21.8 mm (Minimum)Bubble LevelYesMonopod Foot FeaturesFold Out Base, RemovableGeneralLoad Capacity8.8 lb / 3.99 kgMaximum Working Height73.2″ / 185.9 cmMinimum Working Height29.3″ / 74.4 cmFolded Length34″ / 86.36 cmMaterialsAluminum AlloyWeight5.1 lb / 2.31 kg
Description : 1. Clip-On Mic for Smartphones, DSLR, Camcorders, Audio recorders, PC etc. 2. Omnidirectional condenser microphone 3. High-quality condenser is ideal for video use 4. Low handling noise 5. For Smartphone: Switch off the microphone. Slide the ON / OFF up to OFF / Smartphone. The power is shut down. 6. For DSLR, Camcorders, Audio recorders, PC etc. Switch on the microphone. Slide the ON / OFF up to ON.
Description : 1. USB charging interface, the charging method is more flexible, and the battery is charged independently.2. The LED screen accurately displays the battery status.3. With micro USB cable, easy to charge.4. The soft-start function can prevent damage from high charging current during charging.5. Small size, capital for business trips and family use, portable and easy to carry.6. Intelligent charging protection, automatic identification of the battery and intelligent charging to prevent overcharge, over discharge, overvoltage, high temperature short circuit.7. Suitable for Canon LP-E10, LPE10, Canon EOS 1100D, 1200D, 1300D, Rebel T3, T5, T6, Kiss X50, X70 DSLR8. Input: 5V 2A 10W9. Output: 8.4V 0,6A 5W
Description : 1. USB charging interface, the charging method is more flexible, and the battery is charged independently.2. The LED screen accurately displays the battery status.3. With micro USB cable, easy to charge.4. The soft-start function can prevent damage from high charging current during charging.5. Small size, capital for business trips and family use, portable and easy to carry.6. Intelligent charging protection, automatic identification of the battery and intelligent charging to prevent overcharge, over discharge, overvoltage, high temperature short circuit.7. Suitable for Canon LP-E10, LPE10, Canon EOS 1100D, 1200D, 1300D, Rebel T3, T5, T6, Kiss X50, X70 DSLR8. Input: 5V 2A 10W9. Output: 8.4V 0,6A 5W
Description : 1. USB charging interface, the charging method is more flexible, and the battery is charged independently.2. The LED screen accurately displays the battery status.3. With micro USB cable, easy to charge.4. The soft-start function can prevent damage from high charging current during charging.5. Small size, capital for business trips and family use, portable and easy to carry.6. Intelligent charging protection, automatic identification of the battery and intelligent charging to prevent overcharge, over discharge, overvoltage, high temperature short circuit.7. Suitable for Canon LP-E17, LPE17, EOS M3, M5, EOS 750D, 760D, EOS T6i, T6S, EOS 8000D, BEIJO X8i, EOS 200D DSLR8. Input: 5V 2A 10W9. Output: 8.4V 0,6A 5W
Description : 1. USB charging interface, the charging method is more flexible, and the battery is charged independently.2. The LED screen accurately displays the battery status.3. With micro USB cable, easy to charge.4. The soft-start function can prevent damage from high charging current during charging.5. Small size, capital for business trips and family use, portable and easy to carry.6. Intelligent charging protection, automatic identification of the battery and intelligent charging to prevent overcharge, over discharge, overvoltage, high temperature short circuit.7. Suitable for Canon LP-E8, LPE8, EOS 550D, EOS 600D, EOS 650D, EOS 700D DSLR8. Input: 5V 2A 10W9. Output: 8.4V 0,6A 5W
Description : 1. USB charging interface, the charging method is more flexible, and the battery is charged independently.2. The LED screen accurately displays the battery status.3. With micro USB cable, easy to charge.4. The soft-start function can prevent damage from high charging current during charging.5. Small size, capital for business trips and family use, portable and easy to carry.6. Intelligent charging protection, automatic identification of the battery and intelligent charging to prevent overcharge, over discharge, overvoltage, high temperature short circuit.7. Compatible for Nikon EN-EL14, EN-EL14A, D3100, D3200, D3300, D3400, D5100, D5200, D5300, D5500, D5600, CoolPix P7000, P7100, P7700, P7800, Df DSLR digital cameras 8. Input: 5V 2A 10W9. Output: 8.4V 0,6A 5W10. Fully compatible with Nikon EN-EL14, EN-EL14A original battery and rechargeable battery.
Pay With Bank Of Cyprus
Pay With Revolut
Pay With Wise
Our friends | Hairbox | Canoncyprus | Nikoncyprus | Kalogiannis68 | ASXMOV | Handyman | ASR | NS1 BG |
© Cameracyprus 2024 All rights reserved
