Description : 1. A nice case to store your SD cards 2. Can store 3 SD cards 3. Small and lightweight, easy to carry Specification: Material - Aluminum Alloy Size - 94 x 61 x 5mm
Description : 1. 100% brand new and high quality 2. This LED light is designed for gopro enthusiast, totally new arriving 3. Perfect for shooting at night, diving or other rayless environment 4. Charging interface: Micro USB output 5. You can use it on the waterproof case of GoPro HERO4 Session /4 /3+ /3 /2 6. Adjustable 3 mode: HI-LOW-SOS 7. 300 lumen. 30M waterproof(30M water pressure test) 8. Can be used together with head band or chest band Specification : Material - ABSPower - Li-Po BatteryBattery Capacity - 1200mAh Compatibility : GoPro HERO4 Session, GoPro HERO4, GoPro HERO3+, GoPro HERO3, GoPro HERO2, GoPro HERO1Xiaoyi, SJCAM SJ7000, SJCAM SJ6000, SJCAM SJ5000, SJCAM SJ4000 Length - 50cm Cable Body Size - 7.5x6.5x4.5cm Weight 126g Package Include : 1 x Tripod Adapter1 x USB Cable1 x LED Video Light1 x Strap1 x Long screw1 x Quick Release Buckle
Description : 1. Water tight with ergonomic design, perfect for human face, no inhaled water. 2. Ventilating fan design, anti-fog, breathe freely without chewing the breathing tube. 3. When in water, the top valve auto closes to prevent water in flow. 4. Dry diving technology stops water from getting into your mouth and prevents gagging. 5. With a mount for mounting action camera. 6. Main body adopts with pc material, lined edge adopts with high grade silicone. 7. Design principle: Dual airflow anti-fog channel, dry top system, drainage valves, elastic fabric head strap, super wide vandal-proof mask. 8. Note: GoPro camera, GoPro camera Waterproof case and screw are not included. Specification : Material - Polycarbonate, PC+ABS Compatibility - GoPro HERO5, GoPro HERO4 Session, GoPro HERO4, GoPro HERO3+, GoPro HERO3, GoPro HERO2, GoPro HERO1, Xiaoyi, SJCAM SJ7000, SJCAM SJ6000, SJCAM SJ5000, SJCAM SJ4000 Package Include 1 x Screw1 x Nut1 x Diving Mask1 x User Manual1 x Mount1 x Rubber Ring
The Amaran AL-HR672W is a daylight-balanced (5500K) LED light that delivers high color accuracy thanks to its 95+ CRI rated bulbs. The light produces a wide 75° beam angle with a brightness of 2,080 lux at a distance of 3.3′, and features a step-less rear dimming dial for adjusting light output from 0 to 100%. Brightness can be also be adjusted remotely from up to 328′ using an included wireless remote. The remote operates on the 2.4 GHz frequency band and uses FSK (frequency-shift keying) to ensure that several different lights can be controlled without interference.The light panel has an 11.9″ diagonal and is only around 1.25″ thick. It can be powered by either an included AC adapter or a Sony L-series type batteries using the dual rear battery slots. Four LED indicator lights on the back of the unit conveniently display the remaining battery life, so you can keep an eye on when it’s time to swap batteries. For mounting, the light has a 1/4″-20 threaded holes on the bottom and sides. A 1/4″-20 to 3/8″-16 screw adapter is included that screws into one of the threaded holes and slots into an included adapter bracket for attaching to a light stand. Also included with the light is a diffusion filter, an orange warming filter, and a carrying bag.Key Features75° beam angleDaylight-balanced 5500K lightHigh CRI of ≥95Rear step-less dimming dial for adjusting light output from 0 to 100%Flicker freeRemote for wireless brightness control from up to 328′ awayDual Sony L-series type battery slotsBattery power indicator lightsAC adapter includedVentilation holes for cool and silence operation1/4″-20 threaded holes1/4″-20 to 3/8″-16 screw adapterTilt adjustable light stand mount adapterDiffusion and orange warming filtersCarrying case included
Description : 1. CRI 95+, almost perfect color accuracy 2. Compact with 198 LEDs, powerful brightness 3. Frameless and 60 degree beam angle design provides a wide illumination 4. Lightweight, portable and compact 5. Battery power indicator 6. Stepless brightness control 7. Color temperature adjustable only 8. Expandable up to 9 LED panels 9. Multiple battery options 10. 16:9 widescreen design 11. Including diffusing filter and CTO filter 12. A faithful case is included Specification: Material - ABS Special Function - Color temperature adjustable only Angle - 60 degree Cooling Mode - Natural Ventilation Color Temperature - 5500K Brightness - 0.5m distance 318 foot candles 3430lux, 1m distance 85 foot candles 920lux, 2m distance 22 foot candles 240lux Average Life - 100,000 hours or above Size - 151mm x 56mm x 100mm Weight - 325g Power Power Source - 6 x AA Battery (not including), 20W or less than Operation Current - 2A or less than Working Voltage - DC 5.5-9.5V Package Include 1 x Manual1 x LED Video Light1 x Warming Filter1 x Carrying Bag1 x Lamp Bracket1 x Extension Attachment
Description : 1. All-Time Great Acoustic Fidelity Aputure A.lav is a professional omni-directional lavalier microphone with selected condenser element. From the microphone to inductor, capacitor, resistor ... a series of carefully selected components that gives a touch of art. It has high signal noise ratio, wide dynamic range, and flat frequency response. It provides clean, bright, yet natural reproduction professional-grade audio in almost any scenario. Bring broadcast quality sound into your life. 2. Sustained and Stable Electro-Acoustic Work Environment Aputure A.lav comes with built-in lithium and well-designed circuits, aiming to provide a precise and stable reference power, of which a qualified voice recording is assured. This hence consists of base of good user experience. 3. Unique Multi Indicator Different from the usual lavalier microphone, the all-in-one compact design, window-penetrating multi-functional indicator of A.lav keeps you informed of power status. Under normal working state, green light is on; under charging status, red light is on and it will goes off when fully charged, ensuring work efficiency. 4. Enhanced Compatibility and Synchronous Monitoring The A.lav from Aputure is well compatible with many devices using 1/8" (3.5mm) TRRS connector like mobile phone or tablet. It can be used in various recording environments to capture audio for lectures, voiceovers, public speaking environments and more general speech pickup in sermons, presentations, instructions, interviews, etc. And its small and portable size makes it an ideal solution for film, television, video, theatre, house of worship that demands a high quality microphone. A.lav can achieve real-time monitoring with some app. 5. Omni-Directional Condenser It provides clean, bright, yet natural reproduction professional-grade audio. The included windscreen and windshield for high wind protection ensure quality recordings in adverse environments 6. Rich Accessories and Anti-Impingement Storage Box - The supplied exquisite and portable case provides rugged and secure protection. - The included windscreen and windshield for high wind protection ensure quality recordings in adverse environments, and the cable winder provides maximum mobility for the wearer. - Duct tape helps A.lav works at any places you want. - 10ft anti-winding wire is Kevlar reinforced cable made of OFC (Oxygen Free Copper) and covered with silicone jacket, no longer worrying knotting issue. Specification: Model A.lav Types Wired Sensitivity -45dB+/-2dB re 1V/Pa @1kHZ Frequency Response 50Hz-20kHz Impedance 800ohm Dynamic Range 114dB (per IEC651) S/N Ratio >= 65dB SPL (@1KHZ,rel 1Pa per IEC651) SPL >=100db Power P10440D / 3.7V Interface : 3.5mm Stereo Cable Length 3m Size 77 x 28.8 x 16mm Package Include : 1 x Microphone 1 x User manual 1 x Wind Shield 1 x Guarantee Card 1 x Storage box 1 x Charge adapter cable 2 x Recording adapter cable 1 x Cable winder
This Benro Connect Video Aluminum Monopod with Flip Locks includes the 3-Leg Base and S4 PROHead to give you a versatile still or video camera support system. Able to hold up to 8.8 lb and extend to 73.2″, the removable base provides three solid points of contact with the ground and acts like a mini tripod. A ball joint on the base allows you to smoothly pan and tilt your camera, and it can be locked so that you can pan with the head independently.The base can be replaced with the included rubber foot for standard monopod use. The four leg sections are secured by flip locks, and it folds down to 34″ for transport in the included carrying case. The S4 PRO is a compact video head with 360° rotation, a posi-step counterbalance system, and variable tilt drag control. There are separate pan and tilt lock levers, and a sliding quick release plate helps to balance the camera.You can convert your monopod to a low-angle tripod/high-hat by simply pulling down on the lock sleeve and unscrewing the video head and the 3-leg base. These two pieces can then be connected to create your low-angle tripod/high-hat.The 3-leg base has 3-position leg angle adjustment locks, with each leg able to be positioned individually. After you’re done shooting, the legs can be reverse folded, making it easy for carrying or storage.The 3-leg base has a built-in ball with lock knob for dynamic movements, or to level out your shot.When shooting in low-angle mode, you can utilize the 90° notch for a vertical orientation, essential when shooting for mobile applications.S4 PRO video head supports up to 8.8 lb and is equipped with a 65mm flat base with a 3/8″-16 thread.Pan and tilt lock, continuous pan and tilt drag, 2-step counterbalance (1-2), illuminated bubble level, and two 1/4″-20 accessory mounts for attaching monitor arms or audio recorders directly to the head.This allows you to attach accessories without needing a cage or rig to do so.Tilt range for the S4 PRO is +90/-75°. The forward 90° tilt helps with tabletop setups. The S4 PRO also features metal ratchet-style knobs and a CNC machined aluminum sliding camera plate.Monopod HeadHead TypeFluid HeadBase Mount3/8″-16 FemaleCamera Mounting Screw1/4″-20 Male, 3/8″-16 MaleFriction ControlYesPan & Tilt RangeVertical Tilt-75° to +90°Panning Range360°LegMounting Screw1/4″-20 Male, 3/8″-16 MaleLeg Lock TypeFlip LockLeg Sections4Leg Diameter1.28″ / 32.4 mm (Maximum)0.86″ / 21.8 mm (Minimum)Bubble LevelYesMonopod Foot FeaturesFold Out Base, RemovableGeneralLoad Capacity8.8 lb / 3.99 kgMaximum Working Height73.2″ / 185.9 cmMinimum Working Height29.3″ / 74.4 cmFolded Length34″ / 86.36 cmMaterialsAluminum AlloyWeight5.1 lb / 2.31 kg
The Benro KH25 Video Tripod Kit is ideal for compact digital video cameras, HDSLRs, and still cameras with long lenses weighing up to 11 lb (5 kg). This tripod replaces the popular AD71FK5 model and features an improved leg locking system and an improved fluid pan and fluid tilt head.The KH25N features a 60mm bowl and head-mounted bubble level to ensure proper alignment for accurate camera placement and level panning. An interchangeable pan arm allows both right and left-handed use. The sturdy and lightweight tripod extends from a minimum height of 28.9 in (73.4 cm) to a maximum height of 61.0 in (155 cm) allowing you to handle the camera comfortably. Twist-lock levers on the dual stage leg system allow you to make specific height adjustments rapidly and easily. The tripod can be folded to a length of 30.5 in (77.4 cm) making it easy to transport. A padded soft case is included at no extra cost.MAXIMUM LOAD11 lb (5 kg)MINIMUM HEIGHT28.9 in (73.5 cm)MAXIMUM HEIGHT61 in (155 cm)NUMBER OF LEG SECTIONS3INDEPENDENT LEG SPREADMid Level SpreaderTILT RANGE90° to -80°QUICK RELEASE (QR) PLATESlide-In Video (QR11)WEIGHT7.5 lb (3.4 kg)
Supporting loads up to 11 lb, the Benro KH26NL Video Tripod Kit is an ideal support solution for compact camcorders and DSLR/mirrorless camera rigs. The system features a dual-stage aluminum legs and a 60mm ball video head for quick leveling. The head has fixed pan/tilt drag with independent pan/tilt locks and uses a sliding quick release plate for camera attachment. The tripod incorporates a mid-level spreader for enhanced rigidity, and offers a working height range of 33.9″ to 72″. The legs are independently adjustable and are secured in place using twist-lock levers. For use on a variety of indoor and outdoor surfaces, the legs feature dual spiked feet that can be covered with removable rubber pads. The entire system folds down to a length of 35.2″ for storage and transport inside the included padded carrying case. GeneralLoad CapacityHead: 11 lb / 5 kgLegs: 55 lb / 25 kgHeight Range33.9 to 72″ / 86 to 182 cmFolded Length35.2″ / 89.4 cmWeight8.8 lb / 4 kgHeadPan DragFixedTilt DragFixedTilt Range-80° to +90°Quick Release PlateQR11 (sliding)LegsMaterialAluminumBowl Diameter60 mmLeg Stages/Sections2/3
Description : 1) Model: BY-VM01 Microphone 2) Radio head type: capacitive 3) Plug: 3.5mm 4) Channel Type: Stereo 5) Microphone use: cameras, SLR Camera 6) Frequency response: 30 -18000Hz 7) Sensitivity: 40dB±2dB ( 0dB = 1V/Pa at 1kHz ) 8) Directivity characteristics: Super Cardioid 9) Impedance: <1K? 10) Signal-to-noise ratio: >76dB (1KHZ at 1 Pa) 11) Power supply: DC 3V 12) Battery Type: 1.5V AAA battery (not include)
Pay With Bank Of Cyprus
Pay With Revolut
Our friends | Hairbox | Canoncyprus | Nikoncyprus | Kalogiannis68 | ASXMOV | Handyman | ASR | NS1 BG |
© Cameracyprus 2022 All rights reserved
.jpg "FEELWORLD LUT7 7 inch IPS Screen, FHD 1920x1200, 2200 nits, HDMI, 4K, Touch Screen, Camera Field Monitor")
.jpg "Camera Battery Charger for Nikon ENEL12, EN-EL12, Nikon Coolpix A900, AW100, P300, S31, S70, S610, S710, S800, S1000pj, S1100pj, S1200pj, S6000, S8000, S9100, W300, KeyMission")
.jpg "Camera Battery Charger for Canon LP-E6, LPE6, EOS 60D, 70D, 7D, 6D, 5D, Mark II, Mark III")
.jpg "Godox TT600 Thinklite Flash ( Not for Sony Mount )")
.jpg "FUJIFILM INSTAX Square Instant Film Black (10 Exposures)")
.jpg "Sony MRW G1 Card Reader, USB 3.1 Gen 2 (10 Gb/s)")
, usb 2.0, usb 1.1 5.jpg "Digitus Card Reader All-in-one, USB 3.0 (5 Gb/s), USB 2.0, USB 1.1")
 and usb 1.1 - 2.jpg "Hama Multi Card Reader, USB 2.0 (480 Mb/s) and USB 1.1")
.jpg "SanDisk 16GB / 32GB / 64GB Ultra UHS-I SDHC, SD Memory Card")
.jpg)
