Description : 1) 1/4 to 3/8 Stainless Steel Screw for Tripod Heads 2) Material: Stainless Steel 3) Length: 20mm
Description : 1. 100% high quality and brand new 2. The two light bracket has two male threads for mounting two lights side by side. 3. It also features a female thread in the center of the bracket for the ability to mount the bracket on multiple types of light support. 4. Z96 dual lamp bracket can connect multi-lamp, multi-lamp fittings assembled one of special combination accessories Specification: Material - Metal Product Size 152mm x 26mm x 3mm
Description : 1) The triple shoe V-bracket mounts an a camera is accessory shoe to provide spaced mounting points for lights, monitors, microphones, or other accessories. 2) Made of study aluminum, it is also lightweight 3) The shoes feature a backstop for secure mounting 4) The mount is not hot shoe, not suitable for flash.
Description : 1) 1/4 to 3/8 stainless steel screw for tripod and tripod Heads 2) Material: stainless steel 3) Length: 45mm
Description : 1) With a standard 1/4 inch female thread it can be easily attached to a tripod or popular umbrella adapters. 2) This Flash Stand Base is very convenient for you to make your flash unit stand up on a flat surface 3) Works perfect with shoe mount flashes and wireless strobe triggers 4) Compatible with: All flash units except Sony Alpha and Minolta units 5) Size: 95x65x10mm 6) Fits almost all the ISO 518 hot shoe flashes, such as Nikon SB800, Canon 580EX/580EXII, Pentax, Olympus, Sigma, etc.
1) This is a brand new mini flash bracket arm fit all brand DSLR camera, you can fix this bracket on the camera bottom ; and it can pivoting flash arm that keeps the flash over the lens in both horizontal and vertical positions. 2) It has a 1/4" tripod socket available on this flash bracket (adjusting screw), thus the camera can be fixed on tripod even the bracket has been attached onto camera 3) This bracket arm dimension: 160 x 25mm 4) Works with all digital and DSLR / SLR cameras 5) Note: that flash hot shoe not fit SONY camera
1) Made of all-metal materials, durable; only 120g, easy to carry. 2) With 3 independently adjustable metal hot shoe, can support different types of professional flash. 3) With umbrella hole in the center, allows flash spot closer to the center. 4) With a 3/8-1/4" adapter screw, can support different kinds of 1/4" or 3/8" light stands or tripods. 5) Applicable to: - Canon 580EXII /580EX / 550EX / 540EZ / 430EXII / 430EX / 420EX/ 380EX - Nikon SB910 / SB900 / SB800 / SB700 / SB600/ SB80DX / SB28 / SB26 / SB24 - Pentax AF540FGZ / AF500FTZ / AF360FGZ / AF330FTZ - Olympus F50R / F36R - Metz AF58 / AF50 / AF48 / AF44 - Nissin DI866 Series / DI622 Series / DI466 - Sigma EF540/ EF530/ EF500 - Vivitar 285 Series / 283 Series
Description : 1. High strength aluminum alloy precising processing. 2. Industry standard quick release plate with double safety device can prevent camera unexpected fall. 3. Head with damping design can let a big camera stay in a steady angle, strong lock, max load 20kg 4. Using forging process,exquisite and durable 5. With 360 degree horizontal scale, fit for panorama shooting 6. Fit for all tripods have 1/4 and 3/8 screw 7. Fit for all SLR cameras and home DV camera camera. Specification: Brand - YELANGUMaterial - Aluminum alloy, ABSSocket Size - 1/4 inch, 3/8 inch Package Include : 1/4 to 3/8 inch screw1 x Gimbal Tripod Head
Supporting loads up to 11 lb, the Benro KH26NL Video Tripod Kit is an ideal support solution for compact camcorders and DSLR/mirrorless camera rigs. The system features a dual-stage aluminum legs and a 60mm ball video head for quick leveling. The head has fixed pan/tilt drag with independent pan/tilt locks and uses a sliding quick release plate for camera attachment. The tripod incorporates a mid-level spreader for enhanced rigidity, and offers a working height range of 33.9″ to 72″. The legs are independently adjustable and are secured in place using twist-lock levers. For use on a variety of indoor and outdoor surfaces, the legs feature dual spiked feet that can be covered with removable rubber pads. The entire system folds down to a length of 35.2″ for storage and transport inside the included padded carrying case. GeneralLoad CapacityHead: 11 lb / 5 kgLegs: 55 lb / 25 kgHeight Range33.9 to 72″ / 86 to 182 cmFolded Length35.2″ / 89.4 cmWeight8.8 lb / 4 kgHeadPan DragFixedTilt DragFixedTilt Range-80° to +90°Quick Release PlateQR11 (sliding)LegsMaterialAluminumBowl Diameter60 mmLeg Stages/Sections2/3
This Benro Connect Video Aluminum Monopod with Flip Locks includes the 3-Leg Base and S4 PROHead to give you a versatile still or video camera support system. Able to hold up to 8.8 lb and extend to 73.2″, the removable base provides three solid points of contact with the ground and acts like a mini tripod. A ball joint on the base allows you to smoothly pan and tilt your camera, and it can be locked so that you can pan with the head independently.The base can be replaced with the included rubber foot for standard monopod use. The four leg sections are secured by flip locks, and it folds down to 34″ for transport in the included carrying case. The S4 PRO is a compact video head with 360° rotation, a posi-step counterbalance system, and variable tilt drag control. There are separate pan and tilt lock levers, and a sliding quick release plate helps to balance the camera.You can convert your monopod to a low-angle tripod/high-hat by simply pulling down on the lock sleeve and unscrewing the video head and the 3-leg base. These two pieces can then be connected to create your low-angle tripod/high-hat.The 3-leg base has 3-position leg angle adjustment locks, with each leg able to be positioned individually. After you’re done shooting, the legs can be reverse folded, making it easy for carrying or storage.The 3-leg base has a built-in ball with lock knob for dynamic movements, or to level out your shot.When shooting in low-angle mode, you can utilize the 90° notch for a vertical orientation, essential when shooting for mobile applications.S4 PRO video head supports up to 8.8 lb and is equipped with a 65mm flat base with a 3/8″-16 thread.Pan and tilt lock, continuous pan and tilt drag, 2-step counterbalance (1-2), illuminated bubble level, and two 1/4″-20 accessory mounts for attaching monitor arms or audio recorders directly to the head.This allows you to attach accessories without needing a cage or rig to do so.Tilt range for the S4 PRO is +90/-75°. The forward 90° tilt helps with tabletop setups. The S4 PRO also features metal ratchet-style knobs and a CNC machined aluminum sliding camera plate.Monopod HeadHead TypeFluid HeadBase Mount3/8″-16 FemaleCamera Mounting Screw1/4″-20 Male, 3/8″-16 MaleFriction ControlYesPan & Tilt RangeVertical Tilt-75° to +90°Panning Range360°LegMounting Screw1/4″-20 Male, 3/8″-16 MaleLeg Lock TypeFlip LockLeg Sections4Leg Diameter1.28″ / 32.4 mm (Maximum)0.86″ / 21.8 mm (Minimum)Bubble LevelYesMonopod Foot FeaturesFold Out Base, RemovableGeneralLoad Capacity8.8 lb / 3.99 kgMaximum Working Height73.2″ / 185.9 cmMinimum Working Height29.3″ / 74.4 cmFolded Length34″ / 86.36 cmMaterialsAluminum AlloyWeight5.1 lb / 2.31 kg