Manufacturers
  • APUTURE
  • BENRO
  • CANON
  • DURACELL
  • EIRMAI
  • ESCAM
  • FEELWORLD
  • FUJIFILM
  • GODOX
  • LEICA
  • NIKON
  • OLYMPUS
  • PENTAX
  • PORTKEYS
  • PULUZ
  • SAMYANG
  • SANDISK
  • SEVENOAK
  • SIGMA
  • SJCAM
  • SONY
  • SZSINOCAM
  • TAMRON
  • TOKINA
  • TRIOPO
  • WASABI POWER
  • YELANGU
  • YONGNUO
BENRO

BENRO

/
Displaying 1 to 3 (of 3 products)
  • Benro KH25 Video Tripod For SLR, DSLR, Video Camera With Fluid Head

    Benro KH25 Video Tripod For SLR, DSLR, Video Camera With Fluid Head

    The Benro KH25 Video Tripod Kit is ideal for compact digital video cameras, HDSLRs, and still cameras with long lenses weighing up to 11 lb (5 kg). This tripod replaces the popular AD71FK5 model and features an improved leg locking system and an improved fluid pan and fluid tilt head.The KH25N features a 60mm bowl and head-mounted bubble level to ensure proper alignment for accurate camera placement and level panning. An interchangeable pan arm allows both right and left-handed use. The sturdy and lightweight tripod extends from a minimum height of 28.9 in (73.4 cm) to a maximum height of 61.0 in (155 cm) allowing you to handle the camera comfortably. Twist-lock levers on the dual stage leg system allow you to make specific height adjustments rapidly and easily. The tripod can be folded to a length of 30.5 in (77.4 cm) making it easy to transport. A padded soft case is included at no extra cost.MAXIMUM LOAD11 lb (5 kg)MINIMUM HEIGHT28.9 in (73.5 cm)MAXIMUM HEIGHT61 in (155 cm)NUMBER OF LEG SECTIONS3INDEPENDENT LEG SPREADMid Level SpreaderTILT RANGE90° to -80°QUICK RELEASE (QR) PLATESlide-In Video (QR11)WEIGHT7.5 lb (3.4 kg)

  • Benro KH26NL Video Tripod For SLR, DSLR, Video Camera With Fluid Head

    Benro KH26NL Video Tripod For SLR, DSLR, Video Camera With Fluid Head

    Supporting loads up to 11 lb, the Benro KH26NL Video Tripod Kit is an ideal support solution for compact camcorders and DSLR/mirrorless camera rigs. The system features a dual-stage aluminum legs and a 60mm ball video head for quick leveling. The head has fixed pan/tilt drag with independent pan/tilt locks and uses a sliding quick release plate for camera attachment. The tripod incorporates a mid-level spreader for enhanced rigidity, and offers a working height range of 33.9″ to 72″. The legs are independently adjustable and are secured in place using twist-lock levers. For use on a variety of indoor and outdoor surfaces, the legs feature dual spiked feet that can be covered with removable rubber pads. The entire system folds down to a length of 35.2″ for storage and transport inside the included padded carrying case. GeneralLoad CapacityHead: 11 lb / 5 kgLegs: 55 lb / 25 kgHeight Range33.9 to 72″ / 86 to 182 cmFolded Length35.2″ / 89.4 cmWeight8.8 lb / 4 kgHeadPan DragFixedTilt DragFixedTilt Range-80° to +90°Quick Release PlateQR11 (sliding)LegsMaterialAluminumBowl Diameter60 mmLeg Stages/Sections2/3

  • Benro Connect S4 Aluminum Monopod with Flip Locks For SLR, DSLR, Video Camera

    Benro Connect S4 Aluminum Monopod with Flip Locks For SLR, DSLR, Video Camera

    This Benro Connect Video Aluminum Monopod with Flip Locks includes the 3-Leg Base and S4 PROHead to give you a versatile still or video camera support system. Able to hold up to 8.8 lb and extend to 73.2″, the removable base provides three solid points of contact with the ground and acts like a mini tripod. A ball joint on the base allows you to smoothly pan and tilt your camera, and it can be locked so that you can pan with the head independently.The base can be replaced with the included rubber foot for standard monopod use. The four leg sections are secured by flip locks, and it folds down to 34″ for transport in the included carrying case. The S4 PRO is a compact video head with 360° rotation, a posi-step counterbalance system, and variable tilt drag control. There are separate pan and tilt lock levers, and a sliding quick release plate helps to balance the camera.You can convert your monopod to a low-angle tripod/high-hat by simply pulling down on the lock sleeve and unscrewing the video head and the 3-leg base. These two pieces can then be connected to create your low-angle tripod/high-hat.The 3-leg base has 3-position leg angle adjustment locks, with each leg able to be positioned individually. After you’re done shooting, the legs can be reverse folded, making it easy for carrying or storage.The 3-leg base has a built-in ball with lock knob for dynamic movements, or to level out your shot.When shooting in low-angle mode, you can utilize the 90° notch for a vertical orientation, essential when shooting for mobile applications.S4 PRO video head supports up to 8.8 lb and is equipped with a 65mm flat base with a 3/8″-16 thread.Pan and tilt lock, continuous pan and tilt drag, 2-step counterbalance (1-2), illuminated bubble level, and two 1/4″-20 accessory mounts for attaching monitor arms or audio recorders directly to the head.This allows you to attach accessories without needing a cage or rig to do so.Tilt range for the S4 PRO is +90/-75°. The forward 90° tilt helps with tabletop setups. The S4 PRO also features metal ratchet-style knobs and a CNC machined aluminum sliding camera plate.Monopod HeadHead TypeFluid HeadBase Mount3/8″-16 FemaleCamera Mounting Screw1/4″-20 Male, 3/8″-16 MaleFriction ControlYesPan & Tilt RangeVertical Tilt-75° to +90°Panning Range360°LegMounting Screw1/4″-20 Male, 3/8″-16 MaleLeg Lock TypeFlip LockLeg Sections4Leg Diameter1.28″ / 32.4 mm (Maximum)0.86″ / 21.8 mm (Minimum)Bubble LevelYesMonopod Foot FeaturesFold Out Base, RemovableGeneralLoad Capacity8.8 lb / 3.99 kgMaximum Working Height73.2″ / 185.9 cmMinimum Working Height29.3″ / 74.4 cmFolded Length34″ / 86.36 cmMaterialsAluminum AlloyWeight5.1 lb / 2.31 kg

/
Displaying 1 to 3 (of 3 products)

Our friends | Hairbox | Canoncyprus | Nikoncyprus | Kalogiannis68 | ASXMOV | Handyman | ASR | NS1 BG |

© Cameracyprus 2024 All rights reserved